10ft Battle Cat Inflatable Catamaran
Room for the crew.
Includes oars, foot pump, two bench seats and travel bag. See what is in the bag
Free shipping. Orders process within 1 business day, then 2 to 6 business days in transit.
MIC-certified hull. We mail your registration paperwork. Or pay over time with Affirm at checkout.
Add to your boatBimini shade, electric pump, Boaters Package
Add to your Battle Cat
-
Bimini sun shade (10ft)$249.00
-
Electric pump$199.00
-
Boaters Package$199.00
Add an electric outboard and save 5% on your boat. Applied automatically at checkout. See motors
By placing an order, you agree to our Terms and Conditions, Warranty and Refund Policy.
Walk around
See every side
of the 10 ft Battle Cat.
Tap a view to see what each part does.
Top view
V-Teak deck.
Textured, UV-coated V-Teak over a 10 PSI drop-stitch floor, for grip and traction wet or dry. Two bench seats, so four people can ride.
- 10 x 5 ft inflated
- 1,000 lb capacity
- Seats 4
Bow view
Open bow.
The bow is open between the pontoons, for easier boarding from the water, a beach or a dock.
- Carbon-reinforced handles
- Rover Marine Blue
Transom view
15 in transom.
Rated up to 10 HP, electric or gas, with hoisting points for a davit or crane and carbon PVC splash flaps.
- Up to 10 HP
- Electric or gas
- Short shaft
Side view
Dual pontoons.
Two 18 in woven T3 PVC pontoons, thermal welded at the air-chamber seams, with carbon-reinforced handles. A 4 + 1 air chamber layout with tubes at 3.5 PSI.
- 18 in tubes
- 98 lb
- Packs to 45 x 28 x 18 in
Underneath
Twin pontoons.
Two pontoons give it a wider stance and a more settled deck for casting, loading gear and bringing the dog.
- Twin pontoons
- 4 + 1 air chambers
Real footage
The 10 ft Battle Cat,
on the water.
How it is built
What's under
the blue.
Four questions owners ask about how a Battle Cat is made. Tap one to see where it sits on the boat and what is inside.
“What is the transom made of?”
Reinforced transom construction
Built stronger. Protected longer.
The transom carries the outboard and takes the constant forces of running. Ours is built in three steps.
- Marine-treated plywoodThe structural core that supports the outboard motor.
- Carefully sealedThe plywood is sealed before anything goes over it.
- Divinycell vinyl wrapA protective layer around the core, against moisture intrusion, wear and environmental exposure.
Read the full answer
The transom is one of the most critical structural components of any inflatable boat, responsible for supporting the outboard motor and withstanding the constant forces generated during operation. At Rover Marine, we've taken additional steps to strengthen and protect this essential component.
Our transoms begin with marine-treated plywood, carefully sealed and wrapped in a protective Divinycell vinyl layer. This additional barrier provides another level of protection against moisture intrusion, wear, and environmental exposure.
By combining structural strength with multiple layers of protection, we've engineered a transom designed to withstand the demands of everyday boating. Because the backbone of your boat deserves more than basic construction.
“When you say "military-grade PVC", what does that mean exactly?”
Military-grade PVC
Premium materials. Uncompromising strength.
Tier 3 woven PVC with heat-welded seams, sourced from material suppliers that also serve military inflatable vessels. Rover boats are used in winter and summer, throughout Canada and the US.
- High-denier woven PVC fabricA woven fabric, engineered for tensile strength, abrasion resistance and structural integrity while staying flexible.
- Heat-welded seamsThermal-welded construction joins the panels.
- Reinforced high-stress areasExtra material where the boat takes the most load.
Read the full answer
Not all inflatable boat materials are created equal. While many manufacturers focus on reducing material costs, Rover Marine prioritizes strength, durability, and long-term performance.
Our Battle Boat and Battle Cat series are constructed using premium, high-denier woven PVC fabric, sourced from material suppliers serving demanding applications, including military inflatable vessels. This reinforced fabric construction is engineered to provide exceptional tensile strength, abrasion resistance, and structural integrity while maintaining the flexibility required for an inflatable boat.
Combined with our thermal-welded construction and reinforced high-stress areas, these materials create a durable foundation for every Rover Marine vessel. Premium construction begins with premium materials, and we refuse to compromise on either.
“What holds the benches to the pontoons?”
Reinforced bench mounting system
Engineered to handle the load.
A reinforced hook-mounted system, built to spread the tension and to go in and out again and again.
- Hook mountThe bench hooks onto the pontoon, so it installs and removes by hand.
- Carbon-textured PVC reinforcement patchReinforces the pontoon where the mount sits and distributes tension across the mounting points.
- High-strength braided nylon attachment
- Removable benchSecure support for passengers, including in choppy conditions.
Read the full answer
Even something as simple as a removable bench deserves thoughtful engineering. While conventional inflatable boats often rely on basic mounting systems, Rover Marine utilizes a reinforced hook-mounted bench system, supported by carbon-textured PVC reinforcement patches and high-strength braided nylon attachments.
This construction is designed to distribute tension across critical mounting points while providing secure support under the demands of everyday use. Whether carrying passengers, navigating choppy conditions, or repeatedly installing and removing the benches, every component is engineered with strength, reliability, and functionality in mind.
It's another example of how Rover Marine takes an ordinary feature and transforms it into a more refined, purpose-built solution. Because even the smallest details should be engineered to perform.
“How thick is the PVC?”
Triple-layer PVC
Three layers. 3 mm thick.
Triple-layer, UV-treated PVC, 3 mm in thickness, with reinforced rubber rails on the sides and on the bottom of the boat.
- Triple-layer PVCThree layers, UV treated, 3 mm in thickness.
- Reinforced rubber rails on the sides
- Reinforced rubber rails on the bottom
Have a build question we did not cover? Call 844-207-6837
Included with your boat
What's in the bag.
Everything you need to row away the day it lands. One travel bag, no trailer.
Travel bagThe whole boat packs into it: 45 x 28 x 18 in.
Two row oars
Foot pump
Two bench seatsSo four people can ride.
Motor sold separately. Add an electric outboard and save 5% on your boat, applied automatically at checkout.
See motors
Owner reviews
I love our Rover Battle Cat! It’s perfect for our family of four, looks great, good for fishing, harbor cruises, and relaxing.
The entire experience from purchase to first experience has been all positive.
Inflatable catamaran
Two pontoons. One open deck.
That layout is why Battle Cat owners take it fishing, snorkeling and out for full days with the family, and it still deflates into one travel bag.
- Open bow boarding. The bow is open between the two pontoons, so stepping aboard from the water, a beach or a dock is easier.
- Wide, settled stance. Two pontoons give a wider platform for casting, loading gear and moving around the deck.
- Packs into one bag. Deflated, it packs to 45 x 28 x 18 in and stows in a trunk, garage or locker.
- Electric or gas. A 15 in short-shaft transom, rated up to 10 HP.
Three days, one boat.
-
Fishing
Room to cast, land fish and keep tackle organized, with a quiet electric approach when you want one.
-
Snorkel and beach days
Snorkel stops, beach runs, dogs and coolers. The open bow makes getting on and off easier.
-
Yacht tender
Quiet dock-to-shore runs with a wider stance. Lift it aboard with a davit or crane, keep it on the swim platform, or tow it behind the mothership.
Fully inflatable catamaran.
Board it.
Mount it.
Pack it.
Step aboard over the open bow. Mount your outboard on the 15 in transom. Pack it into one travel bag when the day is done.
BATTLE CAT 10FT / YAMAHA 6HP.
The blueprint
The 10 ft inflatable catamaran in numbers.
We do it better
Every Detail Matters. Every Inch Engineered.
At Rover Marine, we believe a better boat isn't defined by one feature. It's defined by the attention to detail found in every inch of its construction. From the flooring beneath your feet to the reinforced handles in your hands, we've reimagined even the simplest elements of an inflatable boat. It's not just about building a better-looking boat. It's about engineering a better boat from the inside out.
Rover Marine vs. a conventional inflatable boat
| Feature | Rover Marine | Conventional inflatable |
|---|---|---|
| Flooring | V-Teak: textured, UV-coated, superyacht-inspired | Conventional EVA foam or basic PVC |
| Handles | Reinforced carbon-textured PVC | Standard PVC on basic glued patches |
| Seams | Thermal welded with heat and pressure | Traditional glued seams |
| Color | Signature Rover Marine Blue, Pantone 7697C | Conventional white and gray |
The bottom line
A Higher Standard of Inflatable Boating.
When you compare a Rover Marine Battle Cat with a conventional inflatable boat, the differences extend far beyond appearance. They're found in the materials, the reinforcement, the seam construction, the flooring, and the countless small details that collectively create a more refined vessel.
We've challenged traditional inflatable boat construction by asking a simple question: How can we make every component better?
Built Different. Built for Adventure.
10ft inflatable catamaran
The crew-ready GOAT cat
V-Teak flooring, carbon-reinforced handles, thermal-welded seams and our signature Rover Marine Blue. Every component is engineered to be better. A higher standard of inflatable boating.
Easy setup
Bag to water in about
15 to 20 minutes.
One person can launch it. No trailer, no slip, no marina fees. Real walkthroughs from Nick and the Rover team. Tap a step to jump straight to it.
-
On the water
What is the Battle Cat like on the water?
See it run, filmed by the Offshore Esprit channel.
-
Boat or Cat
Battle Boat or Battle Cat?
Why some boaters pick the Battle Cat: an open bow for easier boarding, a rope ladder and a stable ride.
Motors and add-ons
Build your rig.
Add an electric outboard, the Bimini shade and the Boaters Package now or later. Everything lands in the same cart as your boat. Add a motor with your boat and save 5% on the boat, applied automatically at checkout.
Electric outboards
Saves 5% on your boat-
Short shaft, Essential package
$3,398
-
Short shaft
$2,999
Add-ons
-
Removable sun shade, 10ft size
$249
-
Rope ladder, nav lights, 2 cup holders, rod holder
$199
-
Rechargeable, no manual pumping
$199
Talk to the designer
Speak one-on-one with our vessel designer.
Schedule a one-on-one video or phone call with Nick Lanfranco.
Receive expert advice and the best deals available, directly from the boat designer himself.
Monday to Friday, 10am to 4pm Pacific
“When we went searching for a tender for our own boating needs, the options were so bad and boring that it pushed us to change the outcome for others. So we did.”
10ft Battle Cat inflatable catamaran details
Tech specs
Size and weight
- Inflated size
- 10 ft x 5 ft, 18 in tubes
- Weight
- 98 lb
- Capacity
- 1,000 lb, 4 passengers
- Deflated size
- 45 x 28 x 18 in, in the bag
Hull and materials
- Hull
- Dual-pontoon catamaran with an open bow
- Hull fabric
- Woven T3 PVC
- Seams
- Thermal welded at the air-chamber seams
- Floor
- Drop stitch with V-Teak flooring, textured and UV-coated
- Air chambers
- 4 + 1
- Pressure
- 3.5 PSI tubes, 10 PSI floor
- Bench seats
- 2
- Handles
- Carbon-reinforced PVC
- Splash flaps
- Carbon PVC
- Color
- Signature Rover Marine Blue with V-Teak
Motor
- Max outboard
- 10 HP
- Transom
- 15 in short shaft
- Power
- Electric or gas
Warranty
- Hull
- 5 years
- Tubes and seams
- 3 years
- Accessories
- 2 years
Questions
Is a motor included?
No. The 10ft comes with a travel bag, two oars, a foot pump and two bench seats. Add a Torqeedo or ePropulsion electric outboard in the Build your rig section on this page, or call us to talk through gas or electric.
What size outboard can I run?
The 10 ft has a 15 in short-shaft transom and is rated up to 10 HP, electric or gas. For quiet electric power, the Torqeedo Travel 1103 S short shaft is a strong pairing.
Can I use it as a yacht tender?
Yes. It has hoisting points for a davit or crane, it sits on a swim platform, it tows behind a bigger boat, and it deflates into its travel bag to stow in a lazarette or locker. The wider stance and open bow make boarding from the swim platform easier.
How long does setup take?
About 15 to 20 minutes from bag to water. Inflate it with the included foot pump, or add the electric pump.
Will it fit in my car?
Packed in its bag it measures 45 x 28 x 18 in and weighs 98 lb. We've seen it fit in the trunk of a small car like a Toyota Corolla. Not sure about yours? Check your trunk opening against those numbers, or call us.
Will it fit on my swim platform?
The 10ft measures 10 ft x 5 ft inflated and weighs 98 lb. Check those numbers against your platform, or call us at 844-207-6837 and we'll help you pick the right size.
What's the warranty?
5 years on the hull, 3 years on tubes and seams, 2 years on accessories, covering manufacturing defects. Punctures, abrasion, dock rash and use-related damage aren't covered; motors carry their manufacturer's warranty.
Is there a return window?
Yes, the 60-Day Captain's Guarantee. See the details.
What is an inflatable catamaran?
An inflatable catamaran rides on two separate pontoons instead of one U-shaped tube. The Battle Cat puts a 10 PSI drop-stitch deck between its pontoons, which gives it a wider stance and an open bow for easier boarding.
What makes a Rover different from other inflatable boats?
The details. V-Teak flooring, a textured, UV-coated surface for grip and traction, where most inflatables use EVA foam or basic PVC. Carbon-reinforced handles and carbon splash flaps, where many use standard PVC handles on basic glued patches. Thermal-welded air-chamber seams instead of traditional glued seams. And our signature Rover Marine Blue in an industry of white and gray.
Is the Battle Cat more stable than the Battle Boat?
The Battle Cat is designed to feel more laterally stable because the dual-pontoon layout creates a wider stance. Stability still depends on size, load, pressure, water conditions, weight placement, motor setup, and how people move aboard.
Can I fish or dive from the Battle Cat?
Yes. The dual-pontoon layout and 10 PSI floor make the Battle Cat useful for fishing, freediving, casual scuba support, gear loading, and boarding from the water. Use proper safety gear, balance the load, and operate within the boat's limits.
Can I tow it behind my boat?
Yes, it can be towed behind a larger vessel. Keep loose gear out of it and tow in calm to moderate conditions.
Can one person launch it?
Yes. One person can carry it to the water and launch it. At 98 lb in a 45 x 28 x 18 in bag, take your time on the carry.
How do I store it for winter?
No special winter storage is needed. Wash it down with fresh water, clean it, and let it dry completely. Fold it into the travel bag only when it is fully dry, then store it somewhere dry to prevent mold and mildew.
How rigid is the floor?
It's a drop-stitch floor inflated to 10 PSI, firm enough to stand and move around on. The pontoons run at 3.5 PSI in a 4 + 1 air chamber layout.
Who is the Battle Cat not for?
Anyone who needs an offshore or rough-water boat: it's built for lakes, harbors, bays and protected coastal water in calm to moderate conditions. And anyone who prefers the classic V-hull dinghy layout: that's the Battle Boat.
Do I need to register it?
Usually, once there's a motor on it. In the US it depends on your state and the waterway; in Canada a Pleasure Craft Licence is required when the motor is 10 hp or more. The hull is MIC-certified and we provide the documentation you need for registration.
Where can I use it?
Lakes, harbors, bays, protected coastal water and inland waterways in calm to moderate conditions. It is not an offshore rough-water boat. Match the route, weather, load, motor and your experience to the conditions.
Battle Boat or Battle Cat?
Battle Boat is the classic V-hull dinghy: compact, familiar handling, tender utility. Battle Cat is the dual-pontoon catamaran: wider stance, open bow, easier boarding, and better for fishing, diving, dogs and heavier gear days.
How long does shipping take?
Shipping is free on orders $100 and up to Canada and the US (Alaska and Hawaii excluded). Orders process within 1 business day, then standard delivery is 2 to 6 business days in transit. Backorders and pre-orders follow the ship window shown at checkout.
Support
California Prop 65
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Read the full Proposition 65 warning.